Products

One of the keys to module longevity is the lamination process, which encapsulates solar cells while attaching front and back protective sheets.

SGCY-BS series full automatic solar panel laminating machine consists of four working chambers (Laminating chamber x 2 + solidifying chamber x 2) arranged by two layers in vertical direction. Each

The principle of the solar photovoltaic laminator is to apply a certain pressure on the surface of each layer of the components, and press these materials together tightly under the heating state. It

Solar photovoltaic assembly line laminator is used in solar cell photovoltaic production lines. The principle is to apply a certain pressure on the surface of each layer of material, and press these

Automatic glass loader is the machine to place the glass which is horizontally placed on a pallet automatically and accurately on the assembly line. It can recycle the glass interval paper

Automatic EVA cutting and laying machine is composed of glass transmission conveyor, positioning mechanism, automatic cutting and punching and automatic laying mechanism, etc. It adopts material

Automatic string laying machine is used for laying the solar cell strings,which is the key procedure of solar module laying-up.

Automatic taping machine is used for pasting PV module tapes. The machine adopts Servo control, servo motor drive tape sticking mechanism, high speed, high precision. Rolling the tapes with rollers

Automatic EL tester with visual inspection is used for pre-laminated and post-laminated PV module tests, to check the solar cell crack, breakage, black spot, mixed wafers, process defect, cold solder

Equipment is automatically controlled, operation process without human intervention. When working, 4 sides of the module can be trimmed at the same time, which is efficient and stable.

Automatic 90 degree inspection conveyor is used for appearance checking of PV module edge after laminating. It adopts synchronous belt conveying, with positioning function. The grasping process of

The movement workflow is frame outgoing from the gluing machine →material (frame) taking by mechanical hand → placing to the positioning of the framing machine (docking with the frame gluing