Solar Photovoltaic Assembly Line Laminator

Solar photovoltaic assembly line laminator is used in solar cell photovoltaic production lines. The principle is to apply a certain pressure on the surface of each layer of material, and press these materials together tightly under heating. It is the key equipment for transitioning from raw materials to solar panels.

SGCY-BT series solar photovoltaic assembly line laminator adopts double-layer structure, which has higher production efficiency than the same type of single-layer laminator.

The laminator can be designed and manufactured according to customer demands. And if you want to know more about it, please contacts us.

 

 

Name	Solar photovoltaic assembly line laminator
Model	SGCY-BT2787
Main parameter	Effective Laminating area (mm)	2700*8700*6	Boundary dimension (mm)	47200*3700*3400
	Power supply	AC380V 3Phase 5 circuit 50Hz	Operating Platform	Touch screen + PLC
	Rated Power	420KW	Compressed air source pressure	0.6～0.8MPa
	Average working power	≤190KW	Compressed air flow	≥800L/min*6
	Operating vacuum degree	40～100Pa	Temperature range	30℃～180℃
	Temperature accuracy	±1℃	Temperature uniformity	≤±2℃
	Aerating rate	0-50L/s	Vacuum time	5～30mins (Adjustable)
	Machine weight	170T	Work cycle	≤9min (According to formula)
	Service life	≥10 years	Utilization rate	≥98%
Other configuration parameter
Parameter	Maximum height of upper chamber	≥250mm	Working height of upper chamber	100-120mm
	Temperature control point	Standard for each chamber 5	Heating power	72KW*4
	Number of use of Silicon gel plate	≥3000 times	Conveying speed	4～14m/min
	Vacuum pump	(2X-70+ZJP600/2X-70/2X-70)*2	Conveyor bearing load	≤300Kg

 

 

A: The double layer triple chamber solar photovoltaic assembly line laminator consists of four processing stages (Laminating chamber x 2 + solidifying chamber x 2) + cooling stage x 2 (cooling chamber x 2) arranged by two layers in vertical direction. Each laminating chamber is an independent chamber, and each layer can execute laminating separately. The loading units are stacked belt conveyors. The unloading units are stacked stainless steel multi-roller conveyors. Will be used in conjunction with assembly line lifting units.

B: At the processing stage, the laminating chambers of the 1st and 2nd layers are vacuumed by split-type 2X-70 Roots Pump Sets, the solidifying chambers of the 1st and 2nd layers are vacuumed by 2X-70 rotary vane pump. The cooling chambers of the 1st and 2nd layers are vacuumed by 2X-70 rotary vane pump.

C: Heating method: oil heating.

D: Effective laminating area: The designed effective laminating area is 2700*8700mm.

E: The transmission systems of high temperature cloth of the upper and lower chamber are equipped with roller brush devices to eliminate the residues on the surface of high temperature cloth and also equipped with vacuum cleaners. The transmission mode adopts three stage large circulation.

F: A specialized platform with ladder is equipped for the second floor around the main engine part , which is convenient for workers to maintain the machine. The platform is 600mm in width and 1800mm in height.

 

 

A: Intelligent temperature control system makes the temperature more uniform and easier to set and control.

B: The lamination pressure can be adjusted according to the process, making the quality of the components better.

C: The advanced touch screen operation platform makes the operation more intuitive, easy to understand, quicker in response and more stable in performance

 

 

 

No.	Item name	Brand
1	PLC	Siemens
2	Touch Screen	Kunlun Tongtai
3	Proximity switch	Bedook
4	Photoelectric switch	Bedook
5	Proximity switch	Bedook
6	Frequency converter	Delta/Lite-On
7	Pressure sensor	SMC
8	Inflation valve	SMC
9	Filter relief-pressure valve	Airtac
10	Pirani vacuum gauge	INFICON

 

Note: For a better machine performance, we reserve the right to revise the configuration and its brand without notice the buyer in advance.

 

 

 

 

Q1: How can we place order?

A: You can contact us by email about your order details, or place order on line.

Q2: What certificate do you have?

A: CE/ISO

Q3: why should you buy from us not from other suppliers?

A: Stable equipment performance, continuous research and development of new technologies, high-quality service.

Q4: How can I pay you?

A: T/T

 

 

A: Delivery time:

Around 45~90 days after received the advance payment.

B: Quality assurance: 1 year

Operational and maintenance manuals of all equipment are in English.

 

 

 

Contact now

Hot Tags: solar photovoltaic assembly line laminator, Double layer Triple chamber Laminator, Solar Photovoltaic Assembly Line Laminator, Double-layer Triple-chamber Laminator