Solar Panel Line Manufacturing Machine

One of the keys to module longevity is the lamination process, which encapsulates solar cells while attaching front and back protective sheets. 

SGCY-T series solar panel line manufacturing machine laminator consists of threee chambers (lamination chamber + curing chamber + cooling chamber), each chamber is an independent chamber, which means higher production efficiency.

SGCY-T series solar panel line manufacturing machine laminator suitable for crystalline silicon module, amorphous silicon module,flexible module,double glass module,etc.

The following content only show the SGCY-T2787 model, if you want to know more information, don't hesitate to contact us.

 

 

Name	Solar Panel Line Manufacturing Machine Laminator
Model	SGCY-T2787
Main parameter	Effective Laminating area (mm)	2700*8700mm*3	Boundary dimension (mm)	47200*3700*1800
	Power supply	AC380V 3Phase 5 circuit 50Hz	Operating Platform	Touch screen + PLC
	Rated Power	210KW	Compressed air source pressure	0.6～0.8MPa
	Average working power	≤95KW	Compressed air flow	≥800L/min*3
	Operating vacuum degree	40～100Pa	Temperature range	30℃～180℃
	Ultimate vacuum	40Pa	Temperature uniformity	≤±2℃
	Laminating Chamber Height	40mm	Temperature accuracy	±1℃
	Aerating rate	0-50L/s	Vacuum time	5～30mins (Adjustable)
	Machine weight	85T	Work cycle	≤9min (According to formula)
	Service life	≥10 years	Utilization rate	≥98%
Other configuration parameter
Parameter	Maximum height of upper chamber	≥250mm	Working height of upper chamber	100-120mm
	Temperature control mode	Intelligent PID control	Heating medium	SD320 heating oil
	Temperature control point	Standard for each chamber 5	Heating power	72KW*2
	Rubber lifetime	≥3000 times	Conveying speed	4～14m/min
	Vacuum pump	2X-70+ZJP600/2X-70/2X-70	Conveyor bearing load	≤300Kg

 

 

A: The solar panel line manufacturing machine laminator using PLC + photoelectric sensor to realize reliable and accurate positioning in transmission positioning process.

B: The three-stage independent frequency converter is used to adjust the transmission speed and get a better speed matching.

C: Multi-audited design, strict quality control, detailed process requirements to ensure the reliable operation. 

D: Multi-point temperature monitoring, the standard temperature module, PID self-tuning technology, temperature, pressure real-time monitoring, over-temperature, over-voltage real-time alarm and automatic processing to ensure control accuracy and safety.

 

 

A: The laminating host machine (Process stage I and Process stage II) adopts pneumatic lifting, controlled by three-position five-way solenoid valve, and the key components (cylinder, lifting solenoid valve, inflation solenoid valve, etc.) all use more stable pneumatic components from famous brands, such as SMC

B: The high-temperature cloth transmission system of the laminating host (Process stage I and Process stage II+Cooling stage) adopts the mode of connecting multiple of high-temperature cloths with each other to do circular motion movement (large cycle) and won't disconnect during the entire transmission process

C: There are 28pcs of fan equipped under each of the unloading stages to achieve cooling function. When unloading, the fan will be launched to accelerate the cooling of the solar modules.

D: The loading and unloading stage adopts gear motor + frequency control speed system to ensure matching with the speed of the main engine

 

 

 

 

 

 

No.	Item name	Brand
1	PLC	Siemens/Schneider/AB
2	Touch Screen	Kunlun Tongtai
3	Inflation valve	SMC
4	Filter relief-pressure valve	SMC/Airtac
5	Gear motor	Wanxin
6	Frequency converter	Delta/Inovance
7	Pressure sensor	SMC/KITA
8	Wafer butterfly valve	FLOWX
9	Contactor	Schneider
10	Two-position five-way solenoid valve	SMC/Airtac

 

Note: For a better machine performance, we reserve the right to revise the configuration and its brand without notice the buyer in advance.

 

 

Q1: How can we place order?

A: You can contact us by email about your order details, or place order on line.

Q2: Do you have a CE/ISO certificate?

A: Yes.

Q3: What else can we buy from you?

A: Solar panel production line, semi-auto laminator, automatic production line function machines, manual semi-auto line auxiliary equipment, solar panel and vulnerable parts of laminator.

Q4: What after-sales service do you provide?

A1: Responsible for customer staff training

A2: One year warranty

 

 

A: Delivery time:

Around 45~90 days after received the advance payment.

B: Quality assurance: 1 year

Operational and maintenance manuals of all equipment are in English.

 

 

 

Contact now

Hot Tags: solar panel line manufacturing machine, One Layer Triple-chamber Laminator, One Layer Triple chamber Laminator, Solar Panel Line Manufacturing Machine