1. Reasonable selection of laminator When choosing a laminator, the first factor to consider is the area of the laminator. To choose an area with strong compatibility, consider the opening method, appearance, etc. Use as many machines as possible. After the selection is completed, install and debug under the guidance of the manufacturer, and enter the normal production and use.
2. The laminator enters the working state After the self-inspection is completed, the laminator can enter the working state.
3. Operation procedure: Press the vacuum pump on button ------ Check the process parameters ------ Check whether the temperature reaches the set value ------ Check whether the working state is automatic or manual, to set the automatic state ------Check whether the vacuum pump is short of oil------Put the components to be laminated------Close the cover------Check the degree of vacuum------Remove the components-- ---- Check the components. After ensuring that all processes are normal, the laminator enters a normal working state.
4. Laminating machine shutdown: When the laminator is shut down, it is required to turn off all power. In order to ensure that it is not misoperated by non-operators, the emergency button can be included in the shutdown range. The operating procedures are as follows: Vacuum pump off------close the cover (the cover should not be closed tightly)------heating off------power off------press the emergency button----- -Close the main gate or: press the emergency button------close the main gate.
5. How to use the laminator after it has been parked for a period of time: After the laminator has been parked for a period of time, start the laminator according to the normal procedure, do not put in the battery board, run the machine empty for two cycles, and remove the water vapor absorbed in the machine. Can be used normally.
