The double glass single-sided solar panel consists of two pieces of tempered glass, EVA film and solar cells laminated at high temperature by laminating machine to form a composite layer. It comprises a tempered glass layer arranged from top to bottom, a material layer (PVB, PO, EVA or ionic polymer), a single crystal or polycrystalline battery pack layer, a material layer, and a tempered glass layer.
All the properties are improved, and the scope of application is significantly expanded. Because the double glass module is made of double glass pressing, its weather resistance and power generation efficiency are better than traditional components, especially for photovoltaic power stations distributed in high humidity, acid rain or salt spray areas, agricultural greenhouse photovoltaic power stations, photovoltaic power stations in large wind and sand areas, the advantages of double glass modules are more significant:
Zero water permeability, synchronous optimization of attenuation rate, efficiency and life. The backplane material of the single glass module is an organic material, and water vapor can penetrate the backplane, resulting in rapid degradation of EVA resin. Its decomposition products contain acetic acid, which will corrode the silver grid line and the junction strip on the photovoltaic cell, making the power generation efficiency of the module decrease year by year. The zero water permeability of the glass reduces the power loss of the component, improves the power generation efficiency, decreases the attenuation rate by about 0.2 percentage points, and extends the life by 5 years to about 30 years.
Good mechanical properties, stable and reliable power generation. The wear resistance, insulation, water resistance and bearing capacity of the glass are better than that of the backplane, which reduces the local hidden cracks of the components and makes the power generation of the components more stable and reliable. In addition, the fire rating of the double glass component is raised from the traditional component of C to A, and the fire performance is significantly improved.
Large heat capacity, reduce heat spot effect. The heat capacity of the double-glass component is large, and the temperature rise rate is smaller than that of the ordinary component, and it is less susceptible to the impact of cold and heat. The thermal diffusion coefficient between the glass and the backplane is more than 7 times different, and the use of double glass components can solve the problem of component heat dissipation and reduce heat spot damage.
No aluminum frame design, effectively solve PID. The double-glass component adopts frameless design, and the electric field that causes PID can not be established without aluminum frame, which greatly reduces the possibility of PID attenuation.
The double glass component can increase the power generation by about 3% with lower attenuation rate, but the glass replaces the backplane
Double glass single-sided solar panel
Jun 01, 2024
Send Inquiry
Categories
Contact Us
- Tel: +86-335-5819806
- Fax: +86-335-5819816
- Email: sales@shuogutech.com
- Add: NO.72 Xigang North Road, Haigang District, Qinhuangdao City, Hebei Province, 066000, P.R.China.







