1. Check the outside first and then check the inside
The hydraulic press of the lamination equipment is a mechanical and hydraulic integrated equipment. When there is a situation that cannot operate normally, it can be reflected from the above aspects. When the maintenance personnel inspect the equipment, they must first inspect the equipment from the outside to the inside, and investigate and deal with the existing problems one by one.
2. Mechanical first, then electrical: vacuum lamination equipment is a very high degree of automation equipment, and belongs to a type of mechanical processing equipment with relatively complex and advanced technology. When a failure occurs, its mechanical failure is easier to find, while the system failure is more difficult to find.
3. Public use first and then special use: When the lamination equipment fails, the general use problem will affect the global use of the entire equipment, while the special use problem will only affect the local use function of the entire equipment.
4. Simple and then complex. When there are many faults in the laminator equipment, the faults cover up each other. When there is no way to start, the relatively simple faults can be solved first, and then the more difficult problems can be solved. In most cases, after the simple problems are solved, the more difficult problems can be solved more easily.
