At present, many users will find that in the process of using the solar laminator, with the increase of use time, the surface will be contaminated with a lot of dust, which will affect its use. It may even cause various failure problems. In addition, many merchants will randomly give non-stick glass cloths of different lengths. The function is to adhere to the upper cavity rubber plate and heating plate to achieve this Melted EVA for isolation.
Under normal circumstances, there are basically 4 kinds of non-stick cloths of different sizes above it, but there is no need to wash it immediately or reuse it again after each use, but it needs to be put aside until it is completely cooled. The next step is to use a special cleaning agent to clean the EVA on the surface, so that the cloth does not stick to the cloth, and the original cleanliness and color can still be maintained. If it cannot be completely removed and still attached to its surface, it will be stained on the glass surface of the battery module when it is put into use later.
As a result, no matter what cleaning agent is used in the later stage, whether it is strong acid or strong alkali, particles of different degrees will be left. However, in the process of use, it will be redissolved with the increase of temperature, which will cause the battery to be blocked, which will lead to a long-term hot spot effect. Obviously, this will bring great inconvenience to the use of the device, and even There are some security risks. Especially in the case of rising heat, the problem of battery emptying is more likely. Therefore, there are still many problems in the use of solar laminators that need to be paid attention to, especially the use of non-stick glass cloth is extremely important. section.
