In daily use, it should be pay attention to frequent inspection and maintenance of solar panels.
The routine operation is as follows
1. Check whether the battery board is damaged, find out in time, and replace it in time.
2. Check whether the connection wire of the battery board and the ground wire are in good contact and whether there is any falling off phenomenon.
3. Check whether there is heat at the junction of the combiner box.
4. Check whether the battery board bracket is loose or broken.
5. Check and clean up the weeds around the battery board that block the battery board.
6. Check whether there is any cover on the surface of the battery board.
7. Check the bird droppings on the surface of the battery board and clean it up if necessary.
8. Identify the cleanliness of the battery board.
9. In windy weather, key inspections should be carried out on the battery panels and brackets.
10. In heavy snow days, the battery board should be cleaned in time to avoid snow and ice on the surface of the battery board.
11. In case of heavy rain, check whether all waterproof seals are in good condition and whether there is any water leakage.
12. Check whether any animal enters the power station and damages the panels.
13. In hail weather, key inspections should be carried out on the surface of the battery panel.
14. Detect the temperature of the battery board and compare it with the ambient temperature for analysis.
15. The detected problems should be dealt with in a timely manner, analyzed and summarized.
16. Make detailed records for each inspection for future analysis.
17. Make analysis and summary records and archive them.
