In this article, we will introduce the performance and production process of solar glass:
1. Core performance requirements
A. High light transmittance: Which can reduces light loss and can also directly enhances the power generation efficiency of the solar cells.
B. Mechanical strength: It needs to withstand wind pressure, snow load and installation stress. Usually, tempering treatment is adopted during the process of its production (bending strength ≥90MPa).
C. Weather resistance: It is needed to resistant to ultraviolet rays, high temperatures (-40℃ to +85℃), humidity and other harsh environments.
D. Low iron content: Iron absorbs visible light, so the iron content of ultra-clear glass must be less than 0.015%.
2. Production process flow
A. Raw material preparation: Quartz sand, soda ash, dolomite, etc. (low-iron formula).
B. Melt forming: Melt above 1500℃ and form by calendering or float method.
C. Annealing: Eliminate internal stress and prevent cracking.
D. Tempering: Rapid cooling after heating to enhance strength.
E. Coating (optional) : Anti-reflection coating is deposited by magnetron sputtering or sol-gel method.







