Home > Knowledge > Content

How to solve the bubbles in the process of using the laminator?

Jul 16, 2022

At present, with the development of my country's economy, more and more enterprises have increased the application of various new technologies and new equipment. In particular, the development of the solar photovoltaic industry has been highly valued by the government. This is a green and clean energy, but laminators play a very important role in this industry. There are many workers using this equipment, how to solve the bubbles in the pressing operation?

From the analysis of the causes, it is necessary to understand that the failure of the vacuum pump or the power failure during the vacuuming stage will easily lead to a large number of air bubbles on the surface of the processed product. Therefore, after such a problem occurs, it is necessary to contact the equipment manufacturer in time to deal with it. In addition to this, there is another reason, that is, the bubbles that appear because of foreign objects. Under normal circumstances, when the indoor humidity reaches a certain value, it is easy to cause this phenomenon. Therefore, in the production stage, it is necessary to monitor the indoor temperature and humidity. If it exceeds a reasonable range, it needs to be adjusted in time.

In addition, when the temperature is too high, it is easy to cause the EVA to not be fully dissolved and bubbles appear. It should be noted that such a phenomenon can be solved by taking a cooling method under the condition of ensuring the adhesive viscosity. But the limiting condition is that if there are large areas of bubbles on the surface, it should be handled by a professional. Under normal conditions, the bubble problem can be well solved by increasing the pressure or increasing the inflation speed.

Finally, another reason for the occurrence of air bubbles during the use of the laminator is the repeated lamination, which also easily causes air bubbles on the surface of the processed components.



Send Inquiry